- Home
- BRAP Pitstop
- Throttle free play: check it before you ride
Garage
Throttle free play: check it before you ride
Free play is the few millimetres the grip travels before the throttle cables start to move. Without it the throttle may not close fully; with too much, the engine responds late.
- Switch the engine off and point the bars straight. Gently roll the grip toward you until you feel resistance and judge the travel at the edge of the grip.
- A typical figure is about 2–3 mm of cable slack, or a few millimetres at the grip. Check the exact value in your owner's manual.
- Turn the bars fully left, then fully right. Idle speed must not change and the free play must not disappear.
- Release the grip from several positions: it should snap back on its own without sticking. If the cable is stiff, binds or the sheath is worn, lube or replace the cable.
- Adjust with the adjuster at the grip: loosen the locknut, turn the adjuster, tighten the locknut. If the adjuster runs out of range, take it to a workshop.
This post was prepared with AI assistance.
Download BRAP
Discuss the news with other riders, record your rides and find people to ride with. Free on iOS and Android.
Read next
Garage