- Home
- BRAP Pitstop
- Brake discs: how to check wear and runout
Garage
Brake discs: how to check wear and runout
A worn or warped disc brakes worse, and runout shows up as pulsing in the lever and bars. In November, with dirt, salt and de-icing agents on the road, discs age faster, so a check is worth the time.
- Inspect the braking surface: deep grooves, blue heat marks, cracks and a noticeable lip at the edge mean the disc needs replacing.
- Run a fingernail from the edge toward the centre. A clear step means the disc has worn unevenly.
- Find the minimum thickness: it is stamped on the disc or listed in the owner's manual. Measure with calipers in several spots; below the minimum means replacement.
- Lift the wheel on a stand and spin it. An even whisper from the pads is normal, but a brake that catches at one spot points to runout.
- Watch for pulsing in the lever when braking from speed. If it's there, check the disc, its mounting and the wheel bearings.
- If you lack experience, leave replacing discs and pads and bleeding the system to a workshop: this is your main safety system.
This post was prepared with AI assistance.
Download BRAP
Discuss the news with other riders, record your rides and find people to ride with. Free on iOS and Android.
Read next
Garage