Garage

Bent lever: what to do on the spot

A lever is easy to bend in a drop or a parking tip-over. It matters: you use the brake and clutch every second, and on wet November roads there is little margin for error.

  • Stop somewhere safe and inspect the lever at the base and at the bend: a crack means replacement, not repair.
  • Check the travel: the lever must move freely and return fully. If it binds, check the pivot and the cable or piston.
  • If the lever just rotated together with its mount, loosen the clamp slightly, set a comfortable angle and tighten it. Find the torque in the owner's manual.
  • Don't force a bent lever straight: cold aluminium is brittle and can snap in your hand.
  • A brake lever must give a firm bite. If it goes to the grip, feels spongy or there is fluid around it, don't ride on. Leave brake work to a workshop.

This post was prepared with AI assistance.

Download BRAP

Discuss the news with other riders, record your rides and find people to ride with. Free on iOS and Android.

Read next

← Back to Pitstop